Ningbo Yuehao Laser Equipment Co., Ltd.
宁波粤豪激光设备有限公司
Ningbo laser maker offering the YHS-600 fibre-laser scriber for solar cells and wafers, plus two automatic single-station and dual-station scribing models.
Supplier at a glance
- Location
- Ningbo, Zhejiang
- Equipment listed here
- Laser scribing
- Featured model
- YHS-600 fibre laser scribing machine [1]
- Profile sources
- 3 named sources; source list
Company scope
What the company makes
Yuehao works in laser scribing, marking, welding and mechanical automation. On the solar side, its machines cut and groove silicon wafers and solar cells. The YHS-600 is a compact CNC fibre-laser scriber with a 1064 nm, 30 W source, suited to manual loading and defined scribing jobs.
For continuous production, the catalogue adds two automatic scribers, the one-station YHAS-1000-210 and the two-station YHAS-1500-210. Yuehao sells each of them as its own model with its own sheet. Choose between them by the loading, alignment and separation cycle your line needs, then ask Yuehao for a sample run on your cells. Company experience and quality wording on the website are general marketing; base the decision on the model sheet and your trial.
Company scope sources: [3]
Equipment portfolio
Start with the actual equipment
The entries below cover selected products and series from this manufacturer. Ask for the full catalogue if your project needs other models.
Fibre laser scribing machine →
The Yuehao YHS-600 is a CNC fibre laser scribing machine for solar cells and wafers, with a 1064 nm, 30 W laser and a 210 by 210 mm table. It is a different machine from Yuehao's single-station and dual-station automatic scribers. Quote… [1]
Specifications & selection questions →YHS-600 and automatic models
Yuehao YHS-600 laser scriber and the automatic YHAS models
| Item | Yuehao figure | How to use it |
|---|---|---|
| Laser | 1064 nm, 30 W | Match to your cell material and scribe depth |
| Table travel | 300 × 300 mm | Maximum motion range of the table |
| Table surface | 210 × 210 mm | Physical support area for the cell and fixture |
| Scribing speed | Up to 600 mm/s | Beam path speed; time the full cycle for output |
Figures from the YHS-600 product page. Name the model revision in the order and run your own material in the trial. [1]
YHS-600: laser, table and work type
Yuehao lists a 1064 nm fibre laser rated at 30 W, air cooling and CNC control. Named applications include monocrystalline and polycrystalline PV cells and wafers, plus other semiconductor substrates. The table travels 300 by 300 mm, while the table surface itself measures 210 by 210 mm. Size your cell and fixture against both figures. The machine is described for scribing and grooving, so ask Yuehao which current cell architectures it has processed and whether your separation method needs a follow-up breaking step. Separated cells usually go on to a cell stringer, so match the cut edge to what that machine accepts. [1]
Speed, accuracy and line width
On the YHS-600 sheet, the beam scribes at speeds to 600 mm/s, holds accuracy within 0.05 mm and cuts lines as narrow as 0.03 mm. Path speed tells you how fast the beam moves. Hourly output also depends on loading, alignment, the number of passes and unloading. To compare machines fairly, send your real cell, scribe drawing and edge requirement, and time the whole cycle from loading to removal. [1]
Automatic machines are quoted on their own sheets
Next to the YHS-600, the scribing catalogue shows two automatic models: YHAS-1000-210 with one station and YHAS-1500-210 with two. The homepage sometimes names these models a little differently, so write the exact model and revision into the contract. Automatic features belong to the YHAS machines. If you plan an automated line, check that the quote covers cell loading, unloading and separation and request the specification for the model you are buying. [2][3]
Standard package and warranty terms
What comes with the YHS-600 and what to add to the order
Standard configuration and one-year warranty
The standard YHS-600 package lists a laser source, centrifugal fan, CNC table unit, computer, scribing software and operating manual. Yuehao offers one year of free repair and replacement, except for damage from improper operation. After that, maintenance and parts are charged. Overseas travel costs, local service and the warranty wording for your quotation are set in the order, so ask for them in writing along with the safety enclosure, fume extraction connection, software access and who handles support. [1]
Project fit
Match the offering to your project
The YHS-600 suits a buyer with a defined scribing task: known material, known pattern and manual or simple loading. A factory planning continuous automatic production should compare the YHAS single-station and dual-station machines on their own specifications. The deciding factor is the full handling and separation cycle, more than laser power or beam speed.
Confirm before ordering
- Sample results on your intended cell, covering edge damage, electrical performance and full-cycle throughput.
- Which cell architectures and thicknesses the chosen model accepts, and exactly what automatic handling is included.
- Company registration documents, if your purchasing process needs them; ask Yuehao to supply them with the quotation.
The YHS-600 product page was checked on 2026-10-07; catalogue and company pages carry their September snapshot dates. Marketing wording such as maintenance-free is general and sits outside the warranty terms.
Certificates & approvals
Approvals on file
No factory audit or equipment certificate is on file for this manufacturer yet. Ask for current certificates, with their scope and validity, in your quotation request.
Prepare before contacting
Your Fibre laser scribing machine enquiry checklist
Tick the questions that apply to your project, then take them into your sourcing request. Ticking an item here does not contact the manufacturer.
Your selections remain on this page and are cleared on reload. Download or print to keep a copy. No checklist selections are uploaded.
Continue to sourcing requestBuyer questions
How many cells per hour does 600 mm/s give?
That figure is the top beam path speed. Cells per hour depend on your pattern, the alignment step and how cells are loaded and removed, so time a full trial cycle. [1]
Is the dual-station automatic machine a version of the YHS-600?
Yuehao lists it as a separate model, the YHAS-1500-210. Ask for its own specification and the handling equipment it ships with. [2]
How should cutting quality be judged on the YHS-600?
Define the groove or separation task, the cell thickness and the edge condition you accept. Then have Yuehao show samples that have already gone through your separation step, including any handling damage and the electrical checks you agree with Yuehao.
Sources
Where this information comes from
Written around the YHS-600 product page and Yuehao's scribing catalogue for buyers comparing manual and automatic scribers.
Company facts come from the publications listed below, each with the date it was checked. The project-fit notes and enquiry checklist are our buying guidance.
- Yuehao YHS-600 product page ↗Manufacturer product specification · Checked 2026-10-07
Laser and table figures, standard package and warranty terms.
- Yuehao laser scribing catalogue ↗Manufacturer catalogue · Checked Snapshot 2026-09-26; checked again 2026-10-07
Compact, single-station and dual-station scribing models.
- Yuehao company website ↗Manufacturer website · Checked Snapshot 2026-09-26; checked again 2026-10-07
Business areas and model names used on the homepage.
Report a correction · How we prepare listings · Represent this manufacturer?
Build a useful enquiry
Start with the documented equipment, then define the configuration and acceptance criteria for your project.
Prepare the checklist ↓Saving or comparing does not send a request. The next screen handles account access and the actual sourcing workflow.