EQUIPMENT SERIES
Ideal Energy PV PECVD equipment family
Ideal Energy (Shanghai) Sunflower ↗A PECVD family for solar cell layers, built around large multilayer chambers and fast vacuum transfer, with a choice of two RF frequencies.
Based on Ideal Energy's PECVD product page. Ask for the chamber and model table, wafer thickness limits, film uniformity, deposition rate, gas recipe and sustained output for your configuration.
General illustration of cell production equipment, not a photograph of this model. Ask the manufacturer for current photographs and layout drawings of the configuration offered.
START WITH YOUR PRODUCTION TASK
Pick the cell and film stack, choose the RF and chamber set-up with Ideal Energy, then accept the tool on measured film, wafer and cell results at full load. Ask the company to confirm in writing the model specification and the basis of any efficiency figure it quotes.
SOURCE-LINKED DATA
Published specifications
Values below are published by the manufacturer, each with the date its source was checked. Ask for the figures that apply to your configuration and material in the quotation.
The manufacturer has not published a complete specification table for this entry. Request the exact offered drawing and operating limits.
01 · Manufacturer information
Chamber, transfer and RF design
Ideal Energy describes large plasma-reaction chambers that hold several layers of wafers, a dual-vacuum reactor and rapid wafer transfer without breaking vacuum. The plasma is said to stabilise quickly, and buyers can choose 13.56 MHz or 40.68 MHz RF. The page ties neither option to a model number or a layer recipe, so ask which combination Ideal Energy proposes for your stack.
Ideal Energy also quotes efficiency records that clients reached on HJT, HBC and tandem cells, with outside institutes named as the testers. If you weigh those numbers, request the reports with device and measurement details. Average production efficiency, yield and yearly capacity belong in your own contract terms.
Source: Ideal Energy PECVD product page
02 · Manufacturer information
Published PECVD features and what to specify
| Feature | Ideal Energy lists | Specify in your order |
|---|---|---|
| RF frequency | 13.56 MHz or 40.68 MHz | Generator and chamber set-up, and the film it must produce. |
| Chamber | Large multilayer plasma chamber, dual-vacuum design | Loading pattern, reactor interfaces and a controlled specification. |
| Wafer transfer | Rapid transfer under vacuum | Transfer timing, vacuum continuity and wafer handling. |
| Client records | Efficiency milestones credited to outside institutes | The institute reports and their test conditions. |
Source: Ideal Energy PECVD product page
03 · PVYard procurement analysis
What to send for a PECVD quotation
Cell and layer stack
Cell architecture, wafer format, thickness and incoming condition, the films you need and their electrical and optical targets. Say which recipes already run and which need development. For recipes still in development, Ideal Energy offers trial runs on its R&D PECVD at the Lingang HJT laboratory.
RF and loading
Ask for the proposed RF and chamber choice, loading, carriers and transfer interfaces, and how sensing, calibration and uniformity are held at that load.
Gases and site
Request the process-gas, vacuum, exhaust and utility list for the chosen set-up, with on-site safety duties and access for maintenance.
Source: Ideal Energy PECVD product page
04 · PVYard procurement analysis
Accept films first, then cells, then output
Freeze the set-up
Sign off the model, chamber, RF, load and material package, and name who owns the recipe.
Measure the films
Check thickness, uniformity and the agreed film properties with fixed sampling and metrology. Log the input material and process conditions.
Test wafers and cells
Inspect for handling and plasma damage, then test cells by the agreed method. Your own results decide acceptance, whatever the client records say.
Run at production pace
Measure accepted output and yield on the agreed formats. Try transfer faults, vacuum or process interruptions, restarts and reject handling.
Source: Ideal Energy PECVD product page
05 · PVYard procurement analysis
Ideal Energy PECVD questions
Does picking an RF frequency set the whole recipe?
No. Film stack, reactor set-up, materials and process settings form a separate package that Ideal Energy should quote.
Can I see the institute reports behind the client records?
Ask Ideal Energy for them, together with the cell structures and measurement conditions, before you rely on the figures.
Is there a full model specification?
The product page has none, and some older detail images there no longer display. Request an up-to-date data sheet for the exact tool you are buying.
Source: Ideal Energy PECVD product page
TURN THIS INTO A CLEAR REQUEST
Ask about this product
Include the product-specific questions above and replace every bracket with your actual requirement. Save your edited text to your sourcing brief, then review it before submitting an enquiry. Saving a brief does not send it to a manufacturer.
Sources
Manufacturer information and our buying guidance are labelled section by section above. Each source below shows the date it was checked.
Ideal Energy PECVD product page ↗
Source check: 2026-10-11 · Chamber design, RF options and client efficiency records.
Compare equipment for a related task
These entries are in the same category; check each one's specifications and configuration.