EQUIPMENT MODEL
TCZY-DF1/F3-2222 · Compact automatic/assisted laminator
Yiheng Technology ↗A compact one-chamber laminator for manual, semi-automatic and small-module production. The machine runs the lamination cycle on its own; layup, loading and unloading are handled by operators or neighbouring stations.
Yiheng's 2014 product page gives one model row, and a second listing under a semi-automatic title repeats the same table. The catalogue adds old module-wattage batches and a 9 MW yearly figure.
General illustration of module assembly equipment, not a photograph of this model. Ask the manufacturer for current photographs and layout drawings of the configuration offered.
START WITH YOUR PRODUCTION TASK
Agree the module load and who handles each step, test laminate quality on your materials, then time the whole operator-supported cycle before you plan output.
SOURCE-LINKED DATA
Published specifications
Values below are published by the manufacturer, each with the date its source was checked. Ask for the figures that apply to your configuration and material in the quotation.
The manufacturer has not published a complete specification table for this entry. Request the exact offered drawing and operating limits.
01 · Manufacturer information
Automatic press, people around it
Yiheng names manual and semi-automatic module lines and small-size modules as the target. The machine has one level and one chamber, selectable modes, cleaning features and PLC touchscreen and PID control. Yiheng does not describe automatic layup, loading or unloading with it, so list the jobs your operators or adjacent stations will do. Where the press has to sit inside an automatic line with conveyor handshakes, Yiheng's line-connected single-chamber laminator is the related model.
The catalogue mentions two 160–240 W modules or one 270 W module per load, 9 MW a year and a 10 MW assisted-line setting. Those wattages come from older module sizes and say nothing about your stack, cycle time or yield. The sheet has one working-area row and no full production cycle.
Source: Yiheng TCZY-DF1/F3-2222 product page with parameter sheet
02 · Manufacturer information
TCZY-DF1/F3-2222 figures
| Entry | Published value | What to settle |
|---|---|---|
| Model | TCZY-DF1/F3-2222 | Current build and whether it is still offered. |
| Working size | 2200×2200 mm | How your modules fit, with edge and support clearance. |
| Dimensions / weight | 8000×3200×1500 mm / 9 t | Installation, foundation and service drawings. |
| Installed power | 58 kW | Connection size; measure normal draw and energy per laminate separately. |
| Thermal entries | ±1.5°C uniformity; ±1°C control; room–160°C | Loaded measurement method and your material recipe. |
| Air | 0.6–0.8 MPa | Flow, air quality and fittings. |
Source: Yiheng TCZY-DF1/F3-2222 product page with parameter sheet
04 · PVYard procurement analysis
Plan the assisted workflow
Layup and loading
Describe the stack, carriers, preparation and who feeds and unloads, with safe access and how long a layup may wait.
Laminate quality
Measure cure, adhesion, voids and cell damage on your intended materials. The controller accuracy figure alone tells you little about the laminate.
Counting output
Add preparation, loading, pressing, unloading, inspection, cleaning and breaks, and fix the working calendar before you turn a cycle into a yearly number.
Source: Yiheng TCZY-DF1/F3-2222 product page with parameter sheet
05 · PVYard procurement analysis
Trial with operators in the loop
Agree load and mode
Fix the model, module arrangement and which steps the machine runs versus the operator.
Test under load
Map temperature with modules in place and inspect the laminate at representative positions.
Time the full sequence
Include operator and neighbouring-station tasks and reject handling, with material batches tracked.
Check upkeep and restarts
Run cleaning, a fault and a safe restart, then record good output and energy used.
Source: Yiheng TCZY-DF1/F3-2222 product page with parameter sheet
06 · PVYard procurement analysis
Buyer questions on the compact laminator
Does automatic mean it lays up and unloads by itself?
Yiheng describes the automatic press cycle only. Plan for layup, loading and unloading by people or other stations.
Can I count on 9 MW a year?
That catalogue figure comes from older modules with no stated calendar or yield. Calculate output from your own stack and cycle.
Is the largest module 2200×2200 mm?
That is the working area. Edge allowance, loading layout and support set the usable module size, so ask for a drawing.
Source: Yiheng TCZY-DF1/F3-2222 product page with parameter sheet
TURN THIS INTO A CLEAR REQUEST
Ask about this product
Include the product-specific questions above and replace every bracket with your actual requirement. Save your edited text to your sourcing brief, then review it before submitting an enquiry. Saving a brief does not send it to a manufacturer.
Sources
Manufacturer information and our buying guidance are labelled section by section above. Each source below shows the date it was checked.
Yiheng TCZY-DF1/F3-2222 product page with parameter sheet ↗
Source check: 2026-10-11 · Positions the model for manual, semi-automatic and small-module lines and gives its single row of size, footprint, power and thermal figures.
Yiheng semi-automatic laminator listing, same model table ↗
Source check: 2026-10-11 · Sold under a semi-automatic title but shows the identical TCZY-DF1/F3-2222 row, so both listings are covered here.
Compare equipment for a related task
These entries are in the same category; check each one's specifications and configuration.