EQUIPMENT SERIES
TCZY-DF1/F3 family · Line-connected single-chamber laminator
Yiheng Technology ↗This is a single-chamber laminator on one level, meant to be fed by and feed into an automatic module line. It has selectable working modes, automatic cleaning, PLC touchscreen operation and PID temperature control.
Yiheng's product page and size table give three DF1/F3 models. The catalogue quotes older 160–270 W module batches and 20 MW a year; the product page says 25 MW.
General illustration of module assembly equipment, not a photograph of this model. Ask the manufacturer for current photographs and layout drawings of the configuration offered.
START WITH YOUR PRODUCTION TASK
Agree conveyor heights, module support and line handshakes first. Then run the chosen size with your real upstream and downstream buffers and time the loaded cycle.
SOURCE-LINKED DATA
Published specifications
Values below are published by the manufacturer, each with the date its source was checked. Ask for the figures that apply to your configuration and material in the quotation.
The manufacturer has not published a complete specification table for this entry. Request the exact offered drawing and operating limits.
01 · Manufacturer information
Built to sit in a line
Yiheng describes one level and one chamber with selectable working modes, automatic cleaning, PLC touchscreen control and PID temperature regulation. It says the machine handles multiple module specifications. The full pump-down, heating and cure cycle and the line communication protocol are not published, so request both. For manual or semi-automatic lines, Yiheng's compact automatic laminator keeps the one-level, one-chamber layout and leaves loading and unloading to operators.
The catalogue example of four 160–240 W modules or three 270 W modules per load reflects older module formats. It goes with a 20 MW yearly figure, while the product page says 25 MW. Neither comes with shifts, recipe, module size or yield. Use the table's working areas and footprints to open a drawing request, and ask Yiheng to state output for your current module.
02 · Manufacturer information
TCZY-DF1/F3 sizes
| Model | Working size mm | Dimensions mm | Installed kW / weight t |
|---|---|---|---|
| TCZY-DF1/F3-5624 | 5600×2400 | 18400×3360×1986 | 100 / 24 |
| TCZY-DF1/F3-4624 | 4600×2400 | 15300×3360×1986 | 88 / 21 |
| TCZY-DF1/F3-3622 | 3600×2200 | 12400×2970×1930 | 65 / 17 |
03 · PVYard procurement analysis
Line interface pack to send
Incoming layup
Module size, stack and weight, carrier, which surfaces may be touched and the condition the layup arrives in.
Conveyors
Upstream and downstream drawings, heights, speeds, buffer positions and who owns the handshake signals.
Process and laminate
Cure, adhesion, visual and cell results you need, who sets the recipe, and the chamber timing Yiheng proposes.
Stops and restarts
What the machine does when the line blocks, how an operator recovers, where rejects go, cleaning access and safe restart.
04 · PVYard procurement analysis
Test it with the line around it
Sign off drawings
Fix the working area, module support, conveyor interfaces and protocol.
Prove the laminate
Measure temperature and laminate results across the agreed area over representative cycles.
Exercise buffers and signals
Show infeed and outfeed movement, a blocked line, stop and restart, and a traceable transfer state.
Measure good output
Include processing, handling, cleaning and line stops, and settle the yearly figure from that operating record.
05 · PVYard procurement analysis
Buyer questions on the TCZY-DF1/F3
Do the old module-wattage loads tell me today's capacity?
They describe older module formats. Your module size, stack and cycle decide current capacity.
Which line protocol does it use?
Yiheng says it connects to automatic lines but publishes no protocol. Ask for it and for an integration test.
Is output 20 MW or 25 MW?
The catalogue says 20 MW and the product page 25 MW. Ask Yiheng to state the operating basis for whichever it quotes.
TURN THIS INTO A CLEAR REQUEST
Ask about this product
Include the product-specific questions above and replace every bracket with your actual requirement. Save your edited text to your sourcing brief, then review it before submitting an enquiry. Saving a brief does not send it to a manufacturer.
Sources
Manufacturer information and our buying guidance are labelled section by section above. Each source below shows the date it was checked.
Yiheng TCZY-DF1/F3 product page with size table ↗
Source check: 2026-10-11 · Describes the inline single-chamber build and lists three sizes; gives 25 MW where the catalogue gives 20 MW.
Compare equipment for a related task
These entries are in the same category; check each one's specifications and configuration.