PV MANUFACTURING EQUIPMENT
Find machinery by production stage and the requirements of your line.
PV cable carries direct current from the module towards the inverter. In a module factory its first job is the pair of leads that leave the junction box, each finished with a connector half made on PV connector assembly equipment. Inside the box the leads meet the ribbons or busbars from the PV interconnection materials class, and many boxes are then filled with PV potting materials. The insulation and sheath are extruded from PV cable compounds. All of these sit in the module assembly stage.
Choose the designation first, because constructions listed separately in a catalogue are built and approved differently. Then settle conductor section, colour, outer diameter and tolerances, since the connector's crimp contact and cable seal only work over a defined range. Agree lead length and how cut ends are stripped and protected. Ask for the rating documents that cover the exact construction you buy, and for sheath marking that ties each reel to its production lot, so the line traceability record can link a module back to its cable reel.
Problems in this area often start at a crimp, a seal or a junction-box entry rather than in the cable body. Build sample leads with your production crimp tool and connector, then check pull-out force, seal fit and contact resistance. Put finished modules through the withstand and insulation checks in module electrical safety testing, and send samples through ageing cycles with environmental testing equipment before you freeze the bill of materials. The note on module material qualification covers how to read ageing data and lot certificates.
The directory lists the H1Z2Z2-K PV cable component family from Ningbo Qrunning Cable. It is a single-core PV cable for module leads and DC wiring, catalogued separately from PV1-F. Pick the section, ask Qrunning for controlled dimensions and the rating documents, and prove the contact, seal and joining process on traceable samples before series supply starts.
Identify the production step, cell or module format and output unit before comparing equipment. Use the listed source, scope and specifications to prepare a configuration-specific enquiry. Missing values are left unspecified and do not count as exact filter matches.
H1Z2Z2-K is Qrunning's single-core solar cable in sections from 1.5 to 240 mm², rated 1.0/1.0 kV AC and 1.5 kV DC between conductors. It sits beside the smaller PV1-F range. Order it by section and construction, and validate it with the exact contact, seal and crimp process you will use on the line.
Ningbo Qrunning CableExact filters only match published specifications. Listings without that published value are not shown.