EQUIPMENT SERIES
Integrated layup and bussing
Suzhou SC-Solar Equipment Co., Ltd. ↗One machine does the work of a layup station and a bussing station: it receives strings, corrects cell alignment, sets the layout and overlap, then irons the busbars. SC-Solar quotes 40 seconds or less per module.
SC-Solar lists frequency tracking, welding-energy monitoring and false-weld detection as smart features. It publishes no detection results or joint data for them, so request both for your materials.
General illustration of module assembly equipment, not a photograph of this model. Ask the manufacturer for current photographs and layout drawings of the configuration offered.
START WITH YOUR PRODUCTION TASK
Consider it when you want fewer transfers and a shorter line. Agree the full sequence from stringer to finished circuit, set placement and joint limits, list exactly which functions are included, and accept it on complete cycles plus fault recovery against your own layout.
SOURCE-LINKED DATA
Published specifications
Values below are published by the manufacturer, each with the date its source was checked. Ask for the figures that apply to your configuration and material in the quotation.
The manufacturer has not published a complete specification table for this entry. Request the exact offered drawing and operating limits.
01 · Manufacturer information
What one combined station takes on
The machine links to high-speed stringers, aligns and corrects the cells, and handles layout, overlap and busbar ironing in one frame. SC-Solar names frequency tracking, welding-energy monitoring and false-weld detection as its smart functions. No frequency range, energy window, detection rate or joint data appears on the page, so ask for them.
SC-Solar says the design cuts handling, floor space and cost, without naming the layout it compares against. Likewise, the 40-second cycle covers more work than a standalone layup or bussing cycle, so compare them only with the same input, output and quality limits. Ask SC-Solar to list which feed, placement, welding and inspection steps your configuration performs.
02 · Manufacturer information
Catalogue figures for the integrated station
| Item | Listed value | Agree for your line |
|---|---|---|
| Glass range | 1640–2550 × 900–1450 mm | Your strings, pattern and stack. |
| Cycle | ≤40 s | Full input to output with all included steps. |
| Power / supply | Peak 35 kW, average 15 kW; AC380 V±5%, 3P+N+PE | Load conditions and electrical drawings. |
| Air | 0.6–0.8 MPa dry/clean; 2 m³/min | Dryness, flow and where the line connects. |
| Controls | PLC, touchscreen and CCD vision | User rights, data output and what the cameras inspect. |
| Dimensions / weight | 6300×3200×2550 mm / 7000 kg | Buffers, service space and a like-for-like layout comparison. |
03 · PVYard procurement analysis
One drawing for placement and joints
In and out
Incoming strings and the finished module layout, with cell and string sizes, gaps or overlap, and glass reference edges.
Joints and monitoring
Solder and ribbon materials, resistance, strength and crack limits, plus the energy and frequency logs and reject records you expect.
Line and service
Stringer and buffer link, protocol, included functions, service access, consumables, and recovery when a module stops halfway.
04 · PVYard procurement analysis
One trial for layout and welding
Fix the scope
Sign off sequence, materials, options and interface drawings.
Measure the finished circuit
Check placement, joints and cell condition by position and by pattern.
Test the monitoring
Introduce agreed defects and process drift and see what is logged, flagged and rejected.
Run full production
Include string feed, combined processing, cleaning and half-finished module recovery; compare output and footprint on an agreed basis.
05 · PVYard procurement analysis
Buyer questions on integrated layup and bussing
Can I compare 40 seconds with a separate bussing cycle?
Only when both cover the same input, output and quality limits.
How much space and cost does it save?
SC-Solar gives no reference layout or figures. Ask for a side-by-side plan for your line.
Will the CCD system find every defect?
No detection rate is published. Check it with known defects at acceptance.
TURN THIS INTO A CLEAR REQUEST
Ask about this product
Include the product-specific questions above and replace every bracket with your actual requirement. Save your edited text to your sourcing brief, then review it before submitting an enquiry. Saving a brief does not send it to a manufacturer.
Sources
Manufacturer information and our buying guidance are labelled section by section above. Each source below shows the date it was checked.
SC-Solar integrated layup and bussing product page ↗
Source check: 2026-10-11 · Outlines the combined layup, overlap and ironing functions with the main machine data.
Compare equipment for a related task
These entries are in the same category; check each one's specifications and configuration.