Suzhou SC-Solar Equipment Co., Ltd.
苏州晟成光伏设备有限公司
SC Solar supplies PV module automation and a laminator family that you configure by layer count, chamber count and heating method, so those three choices come first in any quotation.
Supplier at a glance
- Location
- Suzhou, Jiangsu
- Equipment listed here
- Layup systems · Module laminators
- Profile sources
- 4 named sources; source list
Company scope
What the company makes
Suzhou Shengcheng Solar Equipment trades under the SC SOLAR brand. It builds module-manufacturing automation, cell automation, packaging and warehousing systems, logistics, machine vision and factory-management software. Its website gives 2010 as the founding year and names J.S. Machine as the parent company.
The laminator family is the equipment listed in this directory. A laminator handles the encapsulation step: the assembled glass, cell and film stack goes in, and a controlled vacuum, heat and pressure cycle bonds it into one laminate. SC SOLAR also sells turnkey automation, so say at the start whether you want a laminator alone or a wider line, and compare every offer on that same scope.
Company scope sources: [1]
Equipment portfolio
Start with the actual equipment
The entries below cover selected products and series from this manufacturer. Ask for the full catalogue if your project needs other models.
Automatic busbar welding →
SC-Solar's auto-bussing station corrects cell position and welds the busbars that join the strings, with false-weld detection, flux monitoring and nozzle backflush cleaning. The catalogue lists a cycle of 15 seconds or less, 50 kW peak and 30 kW average power. Busbar…
Specifications & selection questions →Automatic string taping →
SC-Solar's string taper sticks short tapes across neighbouring strings so the layout cannot shift, controlling where each tape goes and how hard it is pressed. The catalogue lists a 14-second cycle that includes infeed and outfeed, tape lengths from 12 to 25…
Specifications & selection questions →EVA repositioning and local pre-melt →
SC-Solar's EVA repositioning station straightens film and glass before string layup, then tacks the film with four local hot-melt points so it stays in place on the way downstream. The catalogue lists ±1 mm correction accuracy and a cycle of 15 seconds…
Specifications & selection questions →Film cutting and layup with edge control →
SC Solar's edge-finding film cutter cuts EVA, POE and backsheet material and lays it on the module. Web-deviation correction keeps the film on track, hot-melt roll changes run without stopping, and module size switches with one click. It lists ±1.5 mm cutting…
Specifications & selection questions →Glass loading and paper separation →
SC Solar's glass loader takes packed module glass off the pallet, separates and collects the interleaving paper, and cleans off static and dust before feeding the line. It handles modules of 1650–2550 × 990–1450 mm at a cycle of ≤12 s, draws…
Specifications & selection questions →ICB lead bending →
SC-Solar's ICB lead bender folds the module's output leads into position, three at a time, guided and checked by camera. The same station can apply high-temperature tape or cloth and stick a barcode label on the backsheet. The catalogue lists a 16-second…
Specifications & selection questions →Insulation-sheet placement →
SC-Solar's sheet placer cuts or punches small insulating pieces from roll stock, finds the target with a camera and sets each piece with a four-axis robot. It can also stick a barcode on the busbar and inspect the result in real time.…
Specifications & selection questions →Integrated layup and bussing →
SC-Solar's integrated machine takes strings straight from the stringer, aligns the cells, lays them out with overlap and irons the busbars in one station. The catalogue lists a 40-second cycle, 35 kW peak and 15 kW average power, PLC and CCD vision…
Specifications & selection questions →Second-glass flip and layup →
SC-Solar's second-glass layup station lifts the rear glass by vacuum, turns it over 180° and lowers it onto the prepared stack of a double-glass module. Servo axes handle alignment and feeding, with long-edge feed and four-side alignment. The catalogue lists a 12-second…
Specifications & selection questions →Solar module laminator series →
SC Solar's laminator series bonds the module stack with vacuum, heat and pressure. You choose single, double or triple layers, one to three chambers and oil or electric heating. Published working areas are 2700 × 8700, 2700 × 9400 and 2700 ×… [2]
Specifications & selection questions →Vision-guided string layup →
SC-Solar's vision-guided layup machine picks finished cell strings and sets them on the glass, with flipping, cutting and repair feeding offered as options. The catalogue lists ±0.3 mm string placement, ±1 mm glass positioning and a 30-second cycle for twelve strings on…
Specifications & selection questions →Laminator family
Pick layers, chambers and heating before comparing figures
| Choice | Options listed | What it decides |
|---|---|---|
| Layers | Single, double or triple | Floor space and loading arrangement |
| Chambers | One, two or three | Process sequence and recipe |
| Heating | Oil or electric | Site utilities and temperature control |
| Nominal format | 2700 × 8700 / 9400 / 10000 mm | Usable area and how your modules are laid out |
Each row is a separate choice. Ask SC SOLAR to state the quoted chamber and layer arrangement in the offer. [2]
Three choices define the machine
SC SOLAR builds laminators with single, double or triple layers, one to three chambers, and oil or electric heating, and says the family can be customized. Each combination is fed, opened and connected to utilities in its own way. Ask for the drawing and process sequence of the exact arrangement you are offered, then check it against your layup stations upstream and your handling downstream. [2]
Catalogue figures and your own recipe
The laminator page lists nominal formats of 2700 by 8700, 9400 or 10000 mm and a working range from room temperature to 180°C. Temperature uniformity and temperature accuracy are given as their own figures, apart from transmission accuracy. These numbers describe the machine family. Your glass, cells and encapsulant still need their own cycle, so agree the loading layout, sensor positions and uniformity test method, then run your real module stack through the planned thermal cycle and judge the cure on the result. [2]
Stations around the press
The wider catalogue covers glass loading, encapsulant cutting and layup, string layup, bussing, sheet placement, trimming, framing, junction-box fitting and welding, and curing transfer. The laminator page lists none of these as standard with the press. Settle who loads and unloads, how hot laminates move on, and which later steps the proposal includes. When one bid covers the press only and another a full assembly line, line them up on the same equipment scope before comparing price. [2]
Company, parent and contact
Who signs the contract and where the press is built
SC SOLAR and its parent J.S. Machine
SC SOLAR's website calls the company a subsidiary of J.S. Machine and shows the parent's stock code, 000821. J.S. Machine's 2025 annual report lists Suzhou Shengcheng Solar Equipment among its consolidated companies for that period. The stock code belongs to the parent. Have the quotation name the contracting company and the plant that will build and test your laminator, since a group can run several sites. [1][4]
Address, acceptance site and headcount
The contact page gives an address at 299 Jinfeng Road in Suzhou High-tech Zone, with separate contacts for business cooperation and for recruitment. For your order, ask where the machine will be assembled and tested, who supplies the heating system and how your sample modules will be used at acceptance. Staff totals differ between sections of the website and carry no date, so ask SC SOLAR for current headcount and capacity if they matter to your decision. [3][1]
Project fit
Match the offering to your project
SC SOLAR suits an encapsulation project where the module stack, loading layout and line scope are already defined. Choose on a recipe trial and on loading and thermal cycles run with your own glass, encapsulant and module format, and ask for any yield figure to be measured on that stack.
Confirm before ordering
- The exact layer and chamber arrangement, the usable loading format and the heating and utilities package included in the price.
- Cure, bubble and appearance results on your module stack, plus a written temperature-uniformity test method and its result.
- The plant where your machine is built and tested, and the current certificate holder and scope.
Centred on picking an SC SOLAR laminator and the module stations it links to; ask the company directly for staff numbers and for yield on your own stack.
Certificates & approvals
Approvals on file
No factory audit or equipment certificate is on file for this manufacturer yet. Ask for current certificates, with their scope and validity, in your quotation request.
Prepare before contacting
Your Automatic busbar welding enquiry checklist
Tick the questions that apply to your project, then take them into your sourcing request. Ticking an item here does not contact the manufacturer.
Your selections remain on this page and are cleared on reload. Download or print to keep a copy. No checklist selections are uploaded.
Continue to sourcing requestRelated procurement notes
Buyer questions
Does the 180°C working range mean my encapsulant will cure?
Cure depends on your module stack and thermal cycle. Ask SC SOLAR to run your materials and confirm the laminate quality in writing. [2]
Is stock code 000821 an SC SOLAR listing?
The website links that code to J.S. Machine, which it names as the parent. Ask for the full name of the contracting company on the quotation. [1]
How do I compare an oil-heated and an electric laminator?
Start with the chamber and layer arrangement, the usable loading layout and the utilities each offer includes. Then ask both suppliers to map temperature and run the cure cycle on the same glass and encapsulant stack, because two presses with the same working temperature can still produce different laminates.
Sources
Where this information comes from
Covers SC SOLAR's laminator options, module-line catalogue, contact roles and parent disclosure; machine acceptance and plant details are settled at quotation stage.
Company facts come from the publications listed below, each with the date it was checked. The project-fit notes and enquiry checklist are our buying guidance.
- SC SOLAR company and solutions overview ↗Manufacturer website · Checked Saved 2026-09-26; checked again 2026-10-07
Company history, parent company and equipment categories.
- SC SOLAR laminator family ↗Manufacturer product page · Checked Checked 2026-10-07
Layer, chamber and heating options with the model table.
- SC SOLAR contact page ↗Manufacturer website · Checked Saved 2026-09-26; checked again 2026-10-07
Address and contact roles.
- J.S. Machine 2025 annual report ↗Listed-company annual report on CNINFO · Checked Company list checked 2026-10-07
Consolidated companies for the report period, including Suzhou Shengcheng Solar Equipment.
Report a correction · How we prepare listings · Represent this manufacturer?
Build a useful enquiry
Start with the documented equipment, then define the configuration and acceptance criteria for your project.
Prepare the checklist ↓Saving or comparing does not send a request. The next screen handles account access and the actual sourcing workflow.