EQUIPMENT SERIES
TCZY-BF1 family · Single-level three-chamber laminator
Yiheng Technology ↗Modules pass through three chambers on one level: lamination, then curing, then a cooling chamber fed by automatically circulating water. Splitting the steps frees the laminating press for the next load.
Yiheng's 2016 product page and its sheet give three TCZY-BF1 sizes. The catalogue places the family for larger double-glass modules and customised lamination areas.
General illustration of module assembly equipment, not a photograph of this model. Ask the manufacturer for current photographs and layout drawings of the configuration offered.
START WITH YOUR PRODUCTION TASK
Choose the working size and the water-cooling package, then trial your glass and encapsulant stack through all three chambers and check the module coming out of the cooler.
SOURCE-LINKED DATA
Published specifications
Values below are published by the manufacturer, each with the date its source was checked. Ask for the figures that apply to your configuration and material in the quotation.
The manufacturer has not published a complete specification table for this entry. Request the exact offered drawing and operating limits.
01 · Manufacturer information
How the three chambers split the work
Yiheng describes one level carrying the module from a lamination chamber to a curing chamber and on to a cooling chamber with automatic water circulation. The catalogue points the family at big double-glass modules and offers customised lamination areas. The sheet itself gives three sizes; anything larger or different needs its own drawing from Yiheng. The same lamination, curing and cooling sequence runs on two stacked levels in Yiheng's two-level three-chamber laminator, and our guide to specifying a PV module laminator covers what to fix before ordering.
Yiheng quotes 100 MW per year, automatic cleaning and energy savings. The page gives no cycle time, module wattage, shift calendar or energy baseline for those figures. It also gives no water flow or temperature for the cooler. Since the cooled exit affects how the module can be handled next, ask for those values for your own stack.
02 · Manufacturer information
TCZY-BF1 sizes
| Model | Working size mm | Dimensions mm | Installed kW / weight t |
|---|---|---|---|
| TCZY-BF1/F1-5824 | 5800×2400 | 33400×3360×1986 | 192 / 58 |
| TCZY-BF1/F1-5624 | 5600×2400 | 32700×3360×1986 | 192 / 55 |
| TCZY-BF1/F1-4624 | 4600×2400 | 27300×3360×1986 | 169 / 40 |
03 · PVYard procurement analysis
Stack, cooling water and handover
Glass and encapsulant
Send module dimensions, glass thickness, layup weight and the cure your materials need. Write down the void, adhesion and damage limits and how you will inspect them.
Cooling circuit
Ask for flow, inlet temperature, pressure, heat load and service points, and say what temperature and condition the module must have at the exit.
Moving between chambers
Agree how the module is supported, which surfaces touch it, where buffers sit and how each handshake works from lamination through to your unloader.
04 · PVYard procurement analysis
Trial ending at the cooler exit
Fix the size
Approve one table row, or a signed drawing for a custom area, together with the stack and load.
Prove lamination and cure
Map the loaded chambers and test cure, adhesion and visual and cell results against your limits.
Check the cooled module
Measure exit temperature and handling over repeated transfers with the agreed water settings.
Run it as production
Count good output and consumption including cleaning, water-supply interruptions, faults and downstream buffers.
05 · PVYard procurement analysis
Buyer questions on the TCZY-BF1
Can I order a custom lamination area?
Yiheng offers customised areas, but the sheet lists only three sizes. Get a drawing and a qualification plan for any other area.
What water flow does the cooler need?
The page gives no flow or temperature figures. Ask Yiheng to state them in the quotation.
What does 100 MW mean for my modules?
Yiheng gives no wattage, calendar, recipe or yield with it. Work out output from your own trial cycle.
TURN THIS INTO A CLEAR REQUEST
Ask about this product
Include the product-specific questions above and replace every bracket with your actual requirement. Save your edited text to your sourcing brief, then review it before submitting an enquiry. Saving a brief does not send it to a manufacturer.
Sources
Manufacturer information and our buying guidance are labelled section by section above. Each source below shows the date it was checked.
Yiheng TCZY-BF1 product page with model sheet ↗
Source check: 2026-10-11 · Lays out the laminate, cure and water-cool chamber sequence and gives the three BF1 size rows with footprint, power and mass.
Compare equipment for a related task
These entries are in the same category; check each one's specifications and configuration.