Equipment finder — Page 2

Heavier DIASC electroplated diamond wire for cropping and squaring silicon ingots before wafering. Six sizes run from 290 μm finished on a 220 μm core to 460 μm on a 350 μm core, with 30–40 to 45–55 μm grain and a 30 km maximum length. Send your ingot cut map so Sanchao can quote the right row.

DIASC electroplated diamond wire for slicing crystalline-silicon wafers. Tungsten-core grades run 41–47 μm finished on 29–35 μm cores; carbon-steel grades run 47–59 μm on 35–45 μm cores. All carry 6–12 μm grain in lengths up to 240 km. Sanchao's 2025 report says PV fine-wire output was cut back, so ask which diameters it can ship before planning a trial.

The DHJ-C welds the busbars that join cell strings during module layup. Machine vision locates the strings and a flexible hold-down clamps them while welding. Yiheng names 60/72-cell, double-glass and half-cell modules with 5BB, 9BB and 12BB patterns, a cycle of ≤25 s and breakage under 1‰. Send your string layout and ribbon spec to get a quote.

The TCAE-DF-55 is an electrically heated bench laminator for small modules and material trials in the lab. It has a 500×500 mm working area, 6.5 kW installed, room temperature to 160°C, PLC touchscreen and selectable modes. Buy it to test encapsulants and recipes on coupons and mini-modules; full-size production needs its own trials on a larger press.

The TCZY-DF1/F3-2222 is Yiheng's small single-chamber laminator, with a 2200×2200 mm working area, 58 kW installed and a 9 t frame. Yiheng sells it for manual and semi-automatic module lines and for small-module production. The press cycle is automatic, but people or nearby stations still lay up, feed and unload, so agree that split before you quote.

The TCZY-DF1/F3 family is a one-level, one-chamber laminator built to sit inside an automatic module line. Yiheng lists three sizes from 3600×2200 to 5600×2400 mm, 65 to 100 kW and 17 to 24 t, with PLC touchscreen and PID control. For this machine the infeed, outfeed and line handshakes matter more than the old yearly output figure, which differs between catalogue and product page.

The TCZY-GF1 is Yiheng's conventional linked laminator: two chambers side by side on one level, with automatic cleaning and PLC and PID temperature control. The sheet lists 4600, 5600 and 5800 mm by 2400 mm sizes at 163 or 188 kW and 31 to 40 t. Yiheng's catalogue and product page give different output and chamber descriptions, so settle those before you compare quotes.

The TCZY-BF1 is a single-level line with three chambers in a row: one laminates, one cures and one cools the module with circulating water. Yiheng aims it at large double-glass modules and custom areas. Its three working sizes run from 4600 to 5800 mm long, all 2400 mm wide, drawing 169 or 192 kW and weighing 40 to 58 t. Choose it when you want cure and cooling off the laminating press.

The TCDY-DJ1 family stacks two laminating levels on one frame, and each level laminates and cures in the same chamber. Upper and lower levels move independently. Yiheng's sheet lists four models with 4600 to 5800 mm by 2400 mm working areas, 179 or 202 kW installed and 35 to 47 t. Quote it when floor space is tight and you want lamination and cure in one press per level.

Yiheng's TCDY-GJ1 family is a two-level automatic laminator with a lamination chamber and a curing chamber on each level and no separate cooling chamber. The levels move independently through two linked stages. Four models span 4600 to 5800 mm working lengths at 2400 mm width, 326–376 kW and 59–74 t. Quote it with your module stack and exit-handling plan.

Yiheng's TCDY-BJ1 family is a two-level automatic laminator with three chambers per level: lamination, curing and water cooling. Each level moves independently through three linked stages. Three models cover 4600, 5600 and 5800 mm by 2400 mm working sizes, at 336–386 kW installed and 80–110 t. Send your module stack and cooling requirements for pricing.

Yiheng's TCSY family is a three-level automatic module laminator in which each level moves on its own, designed with multi-floor workshops in mind. Two models, TCSY-DJ1/J3-5624 and TCSY-DJ1/J5-5624, both press 5600×2400 mm and stand 4700 mm tall, at 287 and 300 kW installed. Send your module stack and building drawings for a quote.